API

संपर्क

इस समूह का हर ऑपरेशन: वह क्या लेता है, क्या लौटाता है और किन त्रुटियों के साथ जवाब दे सकता है।

ऑपरेशन

The address book, and it belongs to the workspace rather than to whoever saved a row. Every member and every key on the workspace reads and writes the same book.

A contact is addressed by its email address on every route here, because no id is exposed. Two things write rows: somebody saving one, in the app or through this API, which lands as manual, and a member sending mail from the app composer, which lands as auto. Mail ARRIVING from an address creates nothing, so an empty book on a busy mailbox is the expected state rather than a fault.

GET`/contacts`

List contacts

contacts:readपढ़ता है

The address book belongs to the workspace, so every key on it reads the same rows and a contact saved by one member is visible to the rest.

Most recently seen first, with contacts that have never been mailed last. source is manual for an address somebody saved, in the app or through this API, and auto for one recorded because a member sent mail to it from the composer. Mail arriving from an address creates no contact.

Paging is keyset. Pass nextCursor back as cursor while hasMore is true.

Requires the contacts:read scope.

क्वेरी पैरामीटर

limitinteger: Rows per page, a whole number from 1 to 200. The server defaults to 50.
कम से कम 1अधिकतम 200डिफ़ॉल्ट50
cursorstring: The nextCursor from the previous page. Never build one yourself.
sourcestring: Narrows the page to contacts recorded that way.
इनमें से एक"manual""auto""form"
qstring: Searches the name and the address. When nothing matches exactly on the first page, close spellings are returned instead, and the pages that follow keep matching the same way.
अधिकतम 200 वर्ण

लौटाता है

200ContactList

Contacts in this workspace.

त्रुटियाँ

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403404422500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.list()contacts.listAll()contacts.iterate()
CLI: openemail contacts list
MCP: listContacts

POST`/contacts`

Create a contact

contacts:writeडेटा बदलता है

The address is the identity, so there is no id to choose and no id in the response. It is trimmed and lower cased before it is stored, and the contact is saved with source set to manual.

The new contact joins the built-in default audience as it is written, and any audience named in audienceIds alongside it. Naming audiences also requires the audiences:write scope.

An address already in the book is refused rather than merged, so a retry cannot overwrite a name somebody edited in the app.

Requires the contacts:write scope.

अनुरोध बॉडी

emailstringआवश्यक: Trimmed and lower cased before it is stored.
अधिकतम 320 वर्णफ़ॉर्मैटemail
namestring: Display name. Leave it out to save the contact without one.
null हो सकता हैअधिकतम 200 वर्ण
notesstring: Free text kept with the contact and shown beside it in the app.
null हो सकता हैअधिकतम 5000 वर्ण
audienceIdsstring[]: Audiences to put the new contact in. The default audience is joined whether or not it is named here. Sending this also requires the audiences:write scope.
अधिकतम 25 आइटम

लौटाता है

201ContactDetail

Created.

त्रुटियाँ

409: contact_exists: that address is already in this workspace book. PATCH it instead.

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403404422500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.create()
CLI: openemail contacts create
MCP: createContactsaveContactupdateContact

GET`/contacts/people`

List people

contacts:readपढ़ता है

Everyone on the Contacts page in the app: the saved contacts, and every address seen in mail as the sender or a recipient of a thread's newest message, with the number of threads and when mail last moved. A person seen in mail and saved is one row.

The addresses seen in mail are listed only when the key also holds threads:read, because they are read out of the mail. Without it the rows are the saved contacts alone and seen is false. A key limited to particular addresses or domains gets the saved contacts alone too, with seen false, even when it holds threads:read, because the other addresses would be read out of the mail of every address in the workspace. Deleted addresses and the mailbox's own addresses are left out.

blockedBy names the workspace blocklist rule that blocks a row, the same rule blocked=true filters on.

Requires the contacts:read scope.

क्वेरी पैरामीटर

limitinteger: Rows per page, 1 to 100.
कम से कम 1अधिकतम 100डिफ़ॉल्ट25
cursorstring: An opaque cursor from the previous page, with the same sort, q and blocked. Keyset, not offset: pass the previous page's nextCursor. One that names nothing in this list is a 400 invalid_cursor.
sortstring: recent puts the newest mail first, then saved contacts never seen in mail. name goes by name, or by address where there is none, ignoring case. threads puts the people with the most threads first.
इनमें से एक"recent""name""threads"डिफ़ॉल्ट"recent"
qstring: Searches names, addresses and notes, with close spellings when nothing matches exactly.
अधिकतम 200 वर्ण
emailstring: One address only, matched case insensitively: the way to read one person's thread count and last mail.
अधिकतम 320 वर्ण
blockedstring: true for only the people the workspace blocklist blocks, whole-domain rules included.
इनमें से एक"true""false"

लौटाता है

200PersonList

A page of people.

त्रुटियाँ

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403404422500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.listPeople()contacts.listAllPeople()contacts.iteratePeople()
CLI: openemail contacts list-people
MCP: listPeople

POST`/contacts/batch-delete`

Delete contacts in bulk

contacts:writeहटाता है

Deletes up to 200 addresses in one call, each the way DELETE /contacts/{email} deletes one: a saved contact goes with its notes, photo and audience memberships, and every address is hidden, so a send does not record it again. Addresses that were only seen in mail are hidden too. An entry that is not an address comes back in invalid and the rest still go through.

Requires the contacts:write scope.

अनुरोध बॉडी

emailsstring[]आवश्यक: Addresses, matched case insensitively. A repeated address counts once.
1 से 200 आइटम

लौटाता है

200ContactBatchDelete

What was deleted.

त्रुटियाँ

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403404422500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.deleteMany()
CLI: openemail contacts delete-many
MCP: deleteContacts

GET`/contacts/{email}`

Retrieve a contact

contacts:readपढ़ता है

The book is the workspace's. The address is matched case insensitively, and it is a path segment, so URL encode it: [email protected] travels as grace%40example.com.

A 404 means only that the address is not in the book. It says nothing about whether mail has been exchanged with it.

Requires the contacts:read scope.

पाथ पैरामीटर

emailstringआवश्यक: The contact's address, matched case insensitively.

लौटाता है

200ContactDetail

The contact.

त्रुटियाँ

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403404422500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.get()
CLI: openemail contacts get
MCP: getContact

PATCH`/contacts/{email}`

Update a contact

contacts:writeडेटा बदलता है

A partial update, never an upsert. An address not in the book is a 404.

The address itself cannot be changed: it is the identity and the path segment, so moving a contact to a new address is a delete and a create. source and lastSeenAt are the server's and are not accepted here.

Requires the contacts:write scope.

पाथ पैरामीटर

emailstringआवश्यक: The contact's address, matched case insensitively.

अनुरोध बॉडी

namestring: New display name. Null clears it.
null हो सकता हैअधिकतम 200 वर्ण
notesstring: New notes. Null clears them.
null हो सकता हैअधिकतम 5000 वर्ण

लौटाता है

200ContactDetail

Saved.

त्रुटियाँ

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403404422500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.update()
CLI: openemail contacts update
MCP: createContactsaveContactupdateContact

PUT`/contacts/{email}`

Save a contact

contacts:writeडेटा बदलता है

Saves the address the way Add to contacts and Keep in contacts do in the app. An address that is not a contact yet becomes one, answered with 201. One recorded from a send becomes manual, and one already saved keeps what it has, answered with 200. A deleted address is brought back. The body is optional.

Requires the contacts:write scope.

पाथ पैरामीटर

emailstringआवश्यक: The address, trimmed and lower cased on the server.

अनुरोध बॉडी

namestring: Up to 200 characters. Left out, the stored name is kept.
अधिकतम 200 वर्ण
notesstring: Up to 5,000 characters. null clears the notes; left out, they are kept.
null हो सकता हैअधिकतम 5000 वर्ण

लौटाता है

200ContactDetail

Already a contact, now kept as manual.

201ContactDetail

Saved as a new contact.

त्रुटियाँ

422: unknown_parameter for any key but name and notes.

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403404500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.save()
CLI: openemail contacts save
MCP: createContactsaveContactupdateContact

DELETE`/contacts/{email}`

Delete a contact

contacts:writeहटाता है

Deletes somebody from the contacts the way Delete does in the app. A saved contact goes with its notes, its photo and every audience membership, the built-in default one included. The address is then hidden: it leaves GET /contacts/people, and mail sent to it from the app composer no longer records it. The address can be one that was only ever seen in mail.

No mail moves. Saving the address again, with POST /contacts or PUT /contacts/{email}, brings it back as a new contact.

Requires the contacts:write scope.

पाथ पैरामीटर

emailstringआवश्यक: The contact's address, matched case insensitively.

लौटाता है

200DeletedContact

Deleted and hidden.

त्रुटियाँ

422: invalid_contact when the path is not an address.

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403404500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.delete()
CLI: openemail contacts delete
MCP: deleteContact

PUT`/contacts/{email}/photo`

Set a contact photo

contacts:writeडेटा बदलता है

Uploads the photo shown for the contact, replacing any there was. Send the image itself as the body, not JSON, with its type in Content-Type: image/png, image/jpeg, image/webp, image/gif. Up to 5 MB goes in. It is fitted into a 512 pixel square and stored as WebP, and an animated image keeps its first frame.

The address has to be a saved contact: save it with PUT /contacts/{email} first.

Requires the contacts:write scope.

पाथ पैरामीटर

emailstringआवश्यक: The contact's address, matched case insensitively.

अनुरोध बॉडी

कंटेंट टाइपimage/png, image/jpeg, image/webp, image/gif

binary

लौटाता है

200ContactDetail

The contact, with its new photoUrl.

त्रुटियाँ

404: contact_not_found on email: the address is not a saved contact.
422: invalid_image when the body is not an image of an accepted type, is too large or cannot be read.
502: image_not_stored: the image was read but could not be stored. Try again.
503: image_busy: the image service is saturated. Try again shortly.

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.setPhoto()
CLI: openemail contacts set-photo
MCP: setContactPhoto

DELETE`/contacts/{email}/photo`

Remove a contact photo

contacts:writeहटाता है

Removes the contact photo and deletes the stored image. Removing a photo from a contact that has none changes nothing.

Requires the contacts:write scope.

पाथ पैरामीटर

emailstringआवश्यक: The contact's address, matched case insensitively.

लौटाता है

200ContactDetail

The contact, with photoUrl null.

त्रुटियाँ

404: contact_not_found on email: the address is not a saved contact.

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403422500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.removePhoto()
CLI: openemail contacts remove-photo
MCP: removeContactPhoto

POST`/contacts/{email}/block`

Block a contact

settings:writeडेटा बदलता है

Puts the address on the workspace blocklist, the one PATCH /settings edits as blockedSenders, so mail from it is refused from then on. A plus tag is dropped: blocking [email protected] blocks [email protected]. When a rule already blocks the address, a whole-domain one included, nothing is added and created is false. The address does not have to be a contact.

It needs settings:write, because it writes the blocklist rather than the contact.

Requires the settings:write scope.

पाथ पैरामीटर

emailstringआवश्यक: The address to block.

लौटाता है

200ContactBlock

Blocked.

त्रुटियाँ

422: invalid_contact when the path is not an address, blocklist_entry_too_broad when it has fewer than two letters or numbers, or the narrowed-key refusal. capability_unsupported on addressAllowlist: the blocklist belongs to the whole workspace and filters the mail of every address in it, so a key limited to particular addresses or domains cannot change it. Use a key with no address or domain restriction.

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403404500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.block()
CLI: openemail contacts block

DELETE`/contacts/{email}/block`

Unblock a contact

settings:writeहटाता है

Takes every workspace blocklist rule that blocks the address off the list, and lists them in removed. When one is a whole-domain rule, everybody at that domain is unblocked with it. Rules set for one address or one domain in the settings are not touched. An address no rule blocks answers with removed empty.

Requires the settings:write scope.

पाथ पैरामीटर

emailstringआवश्यक: The address to unblock.

लौटाता है

200ContactBlock

Unblocked.

त्रुटियाँ

422: invalid_contact when the path is not an address, or the narrowed-key refusal. capability_unsupported on addressAllowlist: the blocklist belongs to the whole workspace and filters the mail of every address in it, so a key limited to particular addresses or domains cannot change it. Use a key with no address or domain restriction.

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403404500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.unblock()
CLI: openemail contacts unblock

GET`/contacts/{email}/threads`

List conversations with a contact

threads:readपढ़ता है

Every thread the address wrote or was written to, in every folder, the Mail tab on a contact in the app. The address does not have to be a saved contact. Each row is a summary of the thread; GET /threads/{id} reads the messages.

Requires the threads:read scope.

पाथ पैरामीटर

emailstringआवश्यक: The address. It does not have to be a saved contact.

क्वेरी पैरामीटर

limitinteger: Threads per page, 1 to 100.
कम से कम 1अधिकतम 100डिफ़ॉल्ट25
cursorstring: The previous page's nextCursor, with the same q and sort.
qstring: Searches inside those threads, with the same syntax as the mailbox search.
अधिकतम 200 वर्ण
sortstring: newest (the default), oldest, sender or subject.
इनमें से एक"newest""oldest""sender""subject"डिफ़ॉल्ट"newest"

लौटाता है

200ContactThreadList

A page of threads.

त्रुटियाँ

422: invalid_contact when the path is not an address, or the narrowed-key refusal. capability_unsupported on addressAllowlist: a contact's threads and activity are read from the mail of every address in the workspace, so a key limited to particular addresses or domains cannot read them. Use a key with no address or domain restriction.

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403404500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.listThreads()contacts.listAllThreads()contacts.iterateThreads()
CLI: openemail contacts list-threads

GET`/contacts/{email}/activity`

Read activity with a contact

threads:readपढ़ता है

The Activity tab on a contact in the app: messages received from the address and sent to it, per bucket, over a window that ends now, with the threads that moved, the threads waiting on a reply from the mailbox, and the median time each side takes to answer. Mail in the bin or in spam is left out.

Requires the threads:read scope.

पाथ पैरामीटर

emailstringआवश्यक: The address. It does not have to be a saved contact.

क्वेरी पैरामीटर

minutesinteger: How far back the window reaches from now. The default is 90 days.
कम से कम 1अधिकतम 10540800डिफ़ॉल्ट129600
grainstring: Bucket width: minute, hour or day, defaulting to day.
इनमें से एक"minute""hour""day"डिफ़ॉल्ट"day"
offsetMinutesinteger: The reader's offset from UTC in minutes, so that a day bucket falls on their calendar.
कम से कम -840अधिकतम 840डिफ़ॉल्ट0

लौटाता है

200ContactActivity

The activity.

त्रुटियाँ

422: invalid_contact when the path is not an address, or the narrowed-key refusal. capability_unsupported on addressAllowlist: a contact's threads and activity are read from the mail of every address in the workspace, so a key limited to particular addresses or domains cannot read them. Use a key with no address or domain restriction.

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403404500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.activity()
CLI: openemail contacts activity
MCP: getContactActivity

PUT`/contacts/{email}/audiences`

Set a contact's audiences

audiences:writeडेटा बदलता है

Sets exactly which audiences the contact is in, the way the audience picker on a contact does in the app. The contact joins every listed audience it is not in yet and leaves every other one, in one transaction. The built-in default audience is always kept, so { "audienceIds": [] } leaves the contact in the default audience alone. Memberships it keeps also keep their addedAt.

The address is matched case insensitively and has to be a contact already. Create it with POST /contacts, which takes audienceIds too. An id that names no audience in this workspace refuses the whole call and changes nothing.

audiences:write is the only scope checked, because this writes memberships rather than the contact. Sending the same list again changes nothing, so a retry is safe.

Requires the audiences:write scope.

पाथ पैरामीटर

emailstringआवश्यक: The contact's address, matched case insensitively.

अनुरोध बॉडी

audienceIdsstring[]आवश्यक: Every audience the contact should be in once the call returns, up to 100. The default audience is kept whether or not it is named, so an empty array leaves only the default one. A repeated id counts once.
अधिकतम 100 आइटम

लौटाता है

200ContactDetail

The contact, with the audiences it is in after the change.

त्रुटियाँ

404: contact_not_found on email when the address is not in the workspace book, or audience_not_found on audienceIds when an id names no audience here. Nothing is changed.
422: invalid_parameter on audienceIds for more than 100 ids, and on the entry, such as audienceIds.0, for an empty one, unknown_parameter for any other key in the body.

वे त्रुटियाँ जो कोई भी ऑपरेशन लौटा सकता है400401403500त्रुटि सूची

इनमें भी उपलब्ध

SDK: contacts.setAudiences()
CLI: openemail contacts set-audiences
MCP: setContactAudiences

ऑब्जेक्ट

`Contact`object

objectstring: इनमें से एक"contact"
emailstring: Trimmed and lower cased on write. This is the key every contact route takes, because no contact id is exposed.
namestring: null हो सकता है
sourcestring: auto when a send from the app composer recorded the address, manual when somebody saved it here or in the app. A recorded send never downgrades a manual contact to auto.
इनमें से एक"manual""auto""form"
notesstring: null हो सकता है
photoUrlstring: Where the contact photo is served, or null when the contact has none. Set it with PUT /contacts/{email}/photo. A new upload gets a new URL.
null हो सकता है
lastSeenAtstring: When mail last went to this address from the app composer. Null until it does.
null हो सकता हैफ़ॉर्मैटdate-time
createdAtstring: फ़ॉर्मैटdate-time
updatedAtstring: फ़ॉर्मैटdate-time

`ContactActivity`object

objectstring

इनमें से एक"contact_activity"

emailstring

sincestring

The start of the first bucket, on the boundary grain and offsetMinutes put it.

फ़ॉर्मैटdate-time

untilstring

फ़ॉर्मैटdate-time

grainstring

इनमें से एक"minute""hour""day"

bucketsobject[]

Only the buckets with mail in them, oldest first.

bucketstring: The bucket in the reader's time: 2026-09-23, 2026-09-23T14 or 2026-09-23T14:05.
receivedinteger: Messages from this address.
sentinteger: Messages from the mailbox to this address.

totalsobject

receivedinteger
sentinteger
threadsinteger: Threads with at least one message in the window.
waitinginteger: Threads whose newest message is from this address, so the mailbox owes the reply.
lastReceivedAtstring: null हो सकता हैफ़ॉर्मैटdate-time
lastSentAtstring: null हो सकता हैफ़ॉर्मैटdate-time

replyTimeobject

yoursnumber: Median milliseconds the mailbox took to answer, or null without a reply to measure.
null हो सकता है
theirsnumber: Median milliseconds this address took to answer.
null हो सकता है

`ContactBatchDelete`object

objectstring: इनमें से एक"contact_batch_delete"
deletedinteger: Addresses deleted and hidden, saved or not.
savedinteger: Of those, how many were saved contacts.
invalidstring[]: Entries that are not addresses, lower cased. Nothing happened to them.

`ContactBlock`object

objectstring

इनमें से एक"contact_block"

emailstring

The address as the blocklist sees it: lower cased, with any plus tag dropped.

blockedboolean

blockedByobject

On a block, the rule that now blocks the address.

null हो सकता है

rulestring: The entry on the workspace blocklist that matches this address, exactly as it is stored.
liststring: blockedSenders for an address or pattern rule, blockedDomains for a rule that blocks a whole domain and every subdomain under it.
इनमें से एक"blockedSenders""blockedDomains"

createdboolean

On a block, false when a rule already blocked the address and nothing was added.

removedobject[]

On an unblock, every rule taken off the workspace blocklist. A blockedDomains entry here unblocked the whole domain.

rulestring: The entry on the workspace blocklist that matches this address, exactly as it is stored.
liststring: blockedSenders for an address or pattern rule, blockedDomains for a rule that blocks a whole domain and every subdomain under it.
इनमें से एक"blockedSenders""blockedDomains"

`ContactDetail`object

objectstring

इनमें से एक"contact"

emailstring

Trimmed and lower cased on write. This is the key every contact route takes, because no contact id is exposed.

namestring

null हो सकता है

sourcestring

auto when a send from the app composer recorded the address, manual when somebody saved it here or in the app. A recorded send never downgrades a manual contact to auto.

इनमें से एक"manual""auto""form"

notesstring

null हो सकता है

photoUrlstring

Where the contact photo is served, or null when the contact has none. Set it with PUT /contacts/{email}/photo. A new upload gets a new URL.

null हो सकता है

lastSeenAtstring

When mail last went to this address from the app composer. Null until it does.

null हो सकता हैफ़ॉर्मैटdate-time

createdAtstring

फ़ॉर्मैटdate-time

updatedAtstring

फ़ॉर्मैटdate-time

audiencesobject[]

Every audience this contact is in, the built-in default one included. Single-contact responses carry it; the list route does not.

idstring: The audience handle, aud_ plus 24 hex.
namestring
builtinstring: default on the one audience every contact joins, null on an audience somebody created.
null हो सकता हैइनमें से एक"default"

`ContactList`object

objectstring: इनमें से एक"list"
dataContact[]
hasMoreboolean
nextCursorstring: null हो सकता है

`ContactThread`object

objectstring

इनमें से एक"thread"

idstring

The id GET /threads/{id} takes.

subjectstring

null हो सकता है

fromobject

Who sent the newest message.

null हो सकता है

namestring: null हो सकता है
emailstring

receivedAtstring

When the newest message arrived or went out.

null हो सकता है

messageCountinteger

hasUnreadboolean

labelsobject[]

idstring
namestring

`ContactThreadList`object

objectstring: इनमें से एक"list"
dataContactThread[]
hasMoreboolean: True when another page follows. Pass nextCursor back as cursor to read it.
nextCursorstring: Opaque. Pass it back as cursor for the next page, and never build one yourself.
null हो सकता है

`DeletedContact`object

objectstring: इनमें से एक"contact"
emailstring
deletedboolean: इनमें से एकtrue
wasSavedboolean: True when a saved contact was removed, false when the address was only seen in mail and has now been hidden.

`Person`object

objectstring

इनमें से एक"person"

emailstring

Lower cased. The key every contact route takes.

displayEmailstring

The address as the most recent message wrote it, which may carry capitals.

namestring

The saved name, or else the newest display name seen in mail.

null हो सकता है

savedboolean

True when the address is a saved contact.

sourcestring

As on a contact, or null when the address is only seen in mail.

null हो सकता हैइनमें से एक"manual""auto""form"

notesstring

null हो सकता है

photoUrlstring

null हो सकता है

threadsinteger

How many threads have this address as the sender or a recipient of their newest message. Null when the key does not read mail or the address has never been seen in it.

null हो सकता है

lastAtstring

When the newest of those threads last moved. Null for a saved contact never seen in mail.

null हो सकता हैफ़ॉर्मैटdate-time

createdAtstring

null हो सकता हैफ़ॉर्मैटdate-time

updatedAtstring

null हो सकता हैफ़ॉर्मैटdate-time

blockedByobject

The workspace blocklist rule that blocks this address, or null when none does.

null हो सकता है

rulestring: The entry on the workspace blocklist that matches this address, exactly as it is stored.
liststring: blockedSenders for an address or pattern rule, blockedDomains for a rule that blocks a whole domain and every subdomain under it.
इनमें से एक"blockedSenders""blockedDomains"

`PersonList`object

objectstring: इनमें से एक"list"
dataPerson[]
hasMoreboolean: True when another page follows. Pass nextCursor back as cursor to read it.
nextCursorstring: Opaque. Pass it back as cursor for the next page, and never build one yourself.
null हो सकता है
seenboolean: True when the addresses seen in mail are included, which needs threads:read. False means the rows are the saved contacts alone.

संपर्क

ऑपरेशन

क्वेरी पैरामीटर

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

अनुरोध बॉडी

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

क्वेरी पैरामीटर

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

अनुरोध बॉडी

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

पाथ पैरामीटर

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

पाथ पैरामीटर

अनुरोध बॉडी

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

पाथ पैरामीटर

अनुरोध बॉडी

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

पाथ पैरामीटर

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

पाथ पैरामीटर

अनुरोध बॉडी

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

पाथ पैरामीटर

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

पाथ पैरामीटर

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

पाथ पैरामीटर

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

पाथ पैरामीटर

क्वेरी पैरामीटर

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

पाथ पैरामीटर

क्वेरी पैरामीटर

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

पाथ पैरामीटर

अनुरोध बॉडी

लौटाता है

त्रुटियाँ

इनमें भी उपलब्ध

ऑब्जेक्ट

Contactobject

ContactActivityobject

ContactBatchDeleteobject

ContactBlockobject

ContactDetailobject

ContactListobject

ContactThreadobject

ContactThreadListobject

DeletedContactobject

Personobject

PersonListobject

`Contact`object

`ContactActivity`object

`ContactBatchDelete`object

`ContactBlock`object

`ContactDetail`object

`ContactList`object

`ContactThread`object

`ContactThreadList`object

`DeletedContact`object

`Person`object

`PersonList`object

आपका इनबॉक्स,
आपकी अपनी शर्तों पर।