MCP sunucusu

Otomasyonlar

Her kişi için kendiliğinden çalışan e-postalar ve adımlar, ve onları başlatan olaylar.

Otomasyon araçları

Araç	Ne yapar
listAutomations	Çalışma alanının otomasyonları, en son değiştirilen önce, durumlarıyla, her birini neyin başlattığıyla ve içinde kaç kişi olduğuyla.
getAutomation	Tüm ayrıntılarıyla tek bir otomasyon: durumu, ayarları ve sayıları, taslağındaki sorunlar ve JSON olarak taslak tanımı. `includePublished` çalışmakta olan sürümü ekler.
listAutomationStarters	Yeni bir otomasyonun başlayabileceği hazır otomasyonlar, her biri tanımıyla birlikte.
createAutomation	Bir başlangıç noktasından, JSON olarak yazılmış bir tanımdan ya da boş bir taslak oluşturun, dilediğiniz ayarlarla. Yayımlanana dek hiçbir şey çalışmaz.
updateAutomation	Bir otomasyonun hemen geçerli olan adını ve ayarlarını değiştirin ya da taslak tanımını değiştirin. Yayındaki bir otomasyon yayımlanmış sürümünü çalıştırmayı sürdürür.
deleteAutomation	Bir otomasyonu sürümleri, kayıtları ve sayılarıyla birlikte kalıcı olarak silin. İçindeki kişiler hemen durur.
publishAutomation	Taslağı çalışan sürüm yapın ve otomasyonu etkinleştirin. Eksik bir taslak, onu engelleyen her sorunla birlikte reddedilir. Ayrıca `emails:send` gerektirir.
pauseAutomation	Yayındaki bir otomasyonu durdurun. Yeni kimse girmez ve içindeki herkes olduğu yerde kalır.
resumeAutomation	Duraklatılmış bir otomasyonu, çalıştırdığı sürümle yeniden etkinleştirin. Ayrıca `emails:send` gerektirir.
archiveAutomation	Bir otomasyonu kalıcı olarak emekliye ayırın ve geçmişini koruyun. İçindeki herkes çıkar.
duplicateAutomation	Bir otomasyonu sürümleri, kişileri ve sayıları olmadan yeni bir taslağa kopyalayın.
sendAutomationTest	Taslağın bir adımının e-postasını kendinize ya da tek bir adrese gönderin. Ayrıca `emails:send` gerektirir.
listAutomationVersions	Yayımlanan sürümler, en yenisi önce, ve hangisinin çalıştığı. `includeDefinitions` her tanımı ekler.
restoreAutomationVersion	Önceki bir sürümü taslağa geri kopyalayın. Sonraki yayımlamaya dek çalışan hiçbir şey değişmez.
getAutomationStats	Bir zaman aralığında giren, şu an içinde olan, tamamlayan ve ayrılan kişiler ile gönderilen, teslim edilen, açılan ve tıklanan e-postalar, toplamda ve her adım için.
listAutomationEnrollments	Bir otomasyonda olan ya da olmuş kişiler, her seferinde bir sayfa, her birinin bulunduğu adım ve nasıl bittiğiyle. Duruma, adıma ya da adresin bir parçasına göre filtreleyin.
getAutomationEnrollment	Bir kişinin otomasyondaki yolu: her adımın onun için ne yaptığı, en eskisi önce.
enrollInAutomation	Bir kişiyi, normalde onu ne başlatırsa başlatsın, yayındaki bir otomasyonun ilk adımına koyun.
removeFromAutomation	Bir kişiyi otomasyondan hemen çıkarın.
sendContactEvent	Bir kişinin başına bir şey geldiğini kaydedin. Bu, tetikleyicisi olayın adını veren yayındaki otomasyonları başlatır ve onu bekleyen beklemeleri sona erdirir.
sendContactEvents	Tek çağrıda en fazla 100 olay kaydedin. Birinin başarısız olması diğerlerini durdurmaz.
listContactEventNames	Çalışma alanının son 90 günde kaydettiği olay adları.
listContactEvents	Bir kişi için kaydedilen olaylar, en yenisi önce, her seferinde bir sayfa.

Okumak automations:read, her değişiklik ise automations:write gerektirir. Yayımlamak, sürdürmek ve test göndermek ayrıca emails:send gerektirir, çünkü otomasyon o zaman onu yayımlayan kişi adına posta gönderir. Olay göndermek contacts:write, bir kişinin olaylarını okumak contacts:read, listContactEventNames ise automations:read gerektirir. Bir üye adına hareket eden bir istemci yalnızca o üyenin oluşturduğu otomasyonları ve o üyenin eklediği kişileri görür.

Bu sunucudaki bazı araçlar, REST API'nin bir doğrulama koduyla koruduğu bir değişiklik yapar ve aynı kodu ister. İstemci son 60 dakikada bir kod doğrulamadıkça ya da kişi Hesap → Bağlı uygulamalar'da onun için 60 dakika boyunca değişikliklere izin ver'i seçmedikçe böyle bir araç Refused (step_up_required): ile başlayan bir sonuçla yanıt verir ve hiçbir şeyi değiştirmez. emptyAudience hiçbir zaman kod istemez. API'nin Kimlik doğrulama sayfası kod isteyen her aracı listeler ve bir kodun nasıl isteneceğini ve doğrulanacağını gösterir.

Araçlar REST API ile aynı kuralları ve retleri uygular, API başvurusunun /automations ve /events sayfaları ise her alanı açıklar. Bir tanım JSON olarak bütün halinde verilir: getAutomation ile okuyun, değiştirin ve tamamını updateAutomation aracına geri verin.

Referans

`listAutomations`

automations:readUygulamadaki asistan sormadan çalıştırırAraç setiautomations

List the automations in this workspace, the most recently changed first: name, id, status (draft, live, paused or archived), what starts each one, its steps and how many contacts are in it now, completed it or left early. Use it to find an automation by name before reading or changing it. One page at a time: when more follow, the last line gives a cursor to pass back.

Girdiler

statusstring: Şunlardan biri"draft""live""paused""archived"
limitinteger: En az 1En çok 100
cursorstring: 1 ile 64 karakter arası

Şurada da var

API: GET /automations
TypeScript: automations.list()automations.listAll()automations.iterate()
Python: automations.list()automations.list_all()automations.iterate()
Ruby: automations.listautomations.list_allautomations.iterate
PHP: automations->listautomations->listAllautomations->iterate
Go: Automations.ListAutomations.ListAllAutomations.Iterate
Java: automations().listautomations().listAllautomations().iterate
C#: Automations.ListAsyncAutomations.ListAllAsyncAutomations.IterateAsync

`getAutomation`

automations:readUygulamadaki asistan sormadan çalıştırırAraç setiautomations

Read one automation: its status, settings, numbers, what is wrong with its draft, and the draft definition (trigger and steps) as JSON, to change and pass back to updateAutomation. includePublished adds the definition of the version that is running, which differs from the draft while there are unpublished changes.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası
includePublishedboolean: Varsayılanfalse

Şurada da var

API: GET /automations/{id}
TypeScript: automations.get()
Python: automations.get()
Ruby: automations.get
PHP: automations->get
Go: Automations.Get
Java: automations().get
C#: Automations.GetAsync

`listAutomationStarters`

automations:readUygulamadaki asistan sormadan çalıştırırAraç setiautomations

The ready-made automations a new one can begin from, such as a welcome series or a birthday note: slug, name, what each is for and its definition as JSON. Pass a slug to createAutomation as starter. A starter leaves the audience, the templates and the from address empty to fill in.

Girdiler

Girdi almaz.

Şurada da var

API: GET /automations/starters
TypeScript: automations.listStarters()
Python: automations.list_starters()
Ruby: automations.list_starters
PHP: automations->listStarters
Go: Automations.ListStarters
Java: automations().listStarters
C#: Automations.ListStartersAsync

`createAutomation`

automations:writeSiz istemediyseniz uygulamadaki asistan önce sorarAraç setiautomations

Create an automation as a draft: from a starter (listAutomationStarters names them), from a definition written out as JSON, or empty. Nothing runs until publishAutomation. The answer lists what the draft still needs before it can be published, such as a template or a from address for each email. Find audiences with listAudiences, templates with listTemplates and forms with listForms.

Girdiler

namestringZorunlu: A short name for the automation. Contacts never see it.
1 ile 120 karakter arası
descriptionstring: One line about what it is for.
En çok 500 karakter
starterstring: 1 ile 64 karakter arası
definitionRecord<string, any> | string: The trigger and steps as JSON: {"trigger": {...}, "entry": "<key of the first step>", "steps": [...]}. Triggers: {"kind": "audience_joined", "audienceId", "includeImported": false}, {"kind": "form_submitted", "formId"}, {"kind": "event", "eventName", "filters": []}, {"kind": "date", "field": "birthday" or "joined", "audienceId", "offsetDays": 0} and {"kind": "manual"}. Every step has a unique key of 3 to 24 lowercase letters and digits starting with a letter, and points at the next step by key in next, or null to end the path. Steps: {"kind": "send_email", "key", "next", "templateId", "templateVersion": null, "from": {"email", "name"}, "replyTo": null, "subject": null, "props": {}}, {"kind": "wait", "key", "next", "wait": {"mode": "duration", "amount": 3, "unit": "days"}}, {"kind": "branch", "key", "condition": {"kind": "email_clicked", "stepKey"}, "yes", "no"}, {"kind": "add_to_audience" or "remove_from_audience", "key", "next", "audienceId"}, {"kind": "update_field", "key", "next", "field", "value": {"source": "static", "value"}}, {"kind": "webhook", "key", "next", "endpointId"} and {"kind": "exit", "key"}. A wait can also be {"mode": "until", "weekdays": [1], "hour": 9, "minute": 0} or {"mode": "event", "eventName", "timeout": {"amount": 7, "unit": "days"}}. Conditions: email_opened and email_clicked with stepKey, in_audience with audienceId, field with field, operator and value, and event with eventName and withinDays. A props value is {"source": "static", "value"}, {"source": "contact", "field"} or {"source": "event", "path"}. Paths never join or loop. getAutomation shows a saved definition in this shape, and listAutomationStarters has ready-made ones.
settingsRecord<string, any> | string: How it runs, as JSON with any of: timezone (an IANA zone such as Europe/London), sendWindow ({"days": [1, 2, 3, 4, 5], "startMinute": 540, "endMinute": 1020} or null for any time), reentryDays (days after finishing before a contact may enter again, or null for once only), exitOnLeave (true takes a contact out when they leave the audience that started it) and listAudienceId (the audience unsubscribes are recorded in).

Şurada da var

API: POST /automations
TypeScript: automations.create()
Python: automations.create()
Ruby: automations.create
PHP: automations->create
Go: Automations.Create
Java: automations().create
C#: Automations.CreateAsync

`updateAutomation`

automations:writeSiz istemediyseniz uygulamadaki asistan önce sorarAraç setiautomations

Change an automation. Its name, description and settings apply at once. definition replaces the whole draft, so start from getAutomation, change the JSON and pass all of it back. A live automation keeps running its published version until publishAutomation, and contacts already in it stay on the version they entered on. Pass only what changes.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası
namestring: 1 ile 120 karakter arası
descriptionstring: null olabilirEn çok 500 karakter
definitionRecord<string, any> | string: The trigger and steps as JSON: {"trigger": {...}, "entry": "<key of the first step>", "steps": [...]}. Triggers: {"kind": "audience_joined", "audienceId", "includeImported": false}, {"kind": "form_submitted", "formId"}, {"kind": "event", "eventName", "filters": []}, {"kind": "date", "field": "birthday" or "joined", "audienceId", "offsetDays": 0} and {"kind": "manual"}. Every step has a unique key of 3 to 24 lowercase letters and digits starting with a letter, and points at the next step by key in next, or null to end the path. Steps: {"kind": "send_email", "key", "next", "templateId", "templateVersion": null, "from": {"email", "name"}, "replyTo": null, "subject": null, "props": {}}, {"kind": "wait", "key", "next", "wait": {"mode": "duration", "amount": 3, "unit": "days"}}, {"kind": "branch", "key", "condition": {"kind": "email_clicked", "stepKey"}, "yes", "no"}, {"kind": "add_to_audience" or "remove_from_audience", "key", "next", "audienceId"}, {"kind": "update_field", "key", "next", "field", "value": {"source": "static", "value"}}, {"kind": "webhook", "key", "next", "endpointId"} and {"kind": "exit", "key"}. A wait can also be {"mode": "until", "weekdays": [1], "hour": 9, "minute": 0} or {"mode": "event", "eventName", "timeout": {"amount": 7, "unit": "days"}}. Conditions: email_opened and email_clicked with stepKey, in_audience with audienceId, field with field, operator and value, and event with eventName and withinDays. A props value is {"source": "static", "value"}, {"source": "contact", "field"} or {"source": "event", "path"}. Paths never join or loop. getAutomation shows a saved definition in this shape, and listAutomationStarters has ready-made ones.
settingsRecord<string, any> | string: How it runs, as JSON with any of: timezone (an IANA zone such as Europe/London), sendWindow ({"days": [1, 2, 3, 4, 5], "startMinute": 540, "endMinute": 1020} or null for any time), reentryDays (days after finishing before a contact may enter again, or null for once only), exitOnLeave (true takes a contact out when they leave the audience that started it) and listAudienceId (the audience unsubscribes are recorded in).
expectedUpdatedAtstring: The Updated time getAutomation gave. When somebody saved the automation since, the change is refused instead of written over theirs.
Biçimdate-time

Şurada da var

API: PATCH /automations/{id}
TypeScript: automations.update()
Python: automations.update()
Ruby: automations.update
PHP: automations->update
Go: Automations.Update
Java: automations().update
C#: Automations.UpdateAsync

`deleteAutomation`

automations:writeUygulamadaki asistan her zaman önce sorarAraç setiautomations

Delete an automation for good, with its versions, its enrollments and its numbers. Contacts in it stop at once. The emails it already sent stay. It cannot be undone: to retire one and keep its history, use archiveAutomation.

Doğrulama kodu ister
DELETE /automations/{id}

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası

Şurada da var

API: DELETE /automations/{id}
TypeScript: automations.delete()
Python: automations.delete()
Ruby: automations.delete
PHP: automations->delete
Go: Automations.Delete
Java: automations().delete
C#: Automations.DeleteAsync

`publishAutomation`

automations:writeemails:sendUygulamadaki asistan her zaman önce sorarAraç setiautomations

Publish an automation: its draft becomes the version that runs and it goes live, so its trigger starts putting contacts in and its emails start going out. Use it for a first publish and to put later changes to work. The draft has to be complete, and a refusal lists every problem that blocks it. Contacts already in it stay on the version they entered on.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası

Şurada da var

API: POST /automations/{id}/publish
TypeScript: automations.publish()
Python: automations.publish()
Ruby: automations.publish
PHP: automations->publish
Go: Automations.Publish
Java: automations().publish
C#: Automations.PublishAsync

`pauseAutomation`

automations:writeSiz istemediyseniz uygulamadaki asistan önce sorarAraç setiautomations

Pause a live automation. Nobody new enters, and everyone in it stays where they are and moves on when it is resumed with resumeAutomation.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası

Şurada da var

API: POST /automations/{id}/pause
TypeScript: automations.pause()
Python: automations.pause()
Ruby: automations.pause
PHP: automations->pause
Go: Automations.Pause
Java: automations().pause
C#: Automations.PauseAsync

`resumeAutomation`

automations:writeemails:sendUygulamadaki asistan her zaman önce sorarAraç setiautomations

Turn a paused automation back on with the version it was running, without publishing the draft. Contacts that were held move on and its emails go out again. One that was paused because something it needs went away stays paused until that is fixed, and the refusal says what.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası

Şurada da var

API: POST /automations/{id}/resume
TypeScript: automations.resume()
Python: automations.resume()
Ruby: automations.resume
PHP: automations->resume
Go: Automations.Resume
Java: automations().resume
C#: Automations.ResumeAsync

`archiveAutomation`

automations:writeUygulamadaki asistan her zaman önce sorarAraç setiautomations

Retire an automation for good and keep its history. Everyone in it leaves, nobody enters again and it can no longer be changed, published or resumed. Its versions, enrollments and numbers stay readable. To stop one for a while, use pauseAutomation.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası

Şurada da var

API: POST /automations/{id}/archive
TypeScript: automations.archive()
Python: automations.archive()
Ruby: automations.archive
PHP: automations->archive
Go: Automations.Archive
Java: automations().archive
C#: Automations.ArchiveAsync

`duplicateAutomation`

automations:writeSiz istemediyseniz uygulamadaki asistan önce sorarAraç setiautomations

Copy an automation into a new draft with "(copy)" after its name: the same draft definition and settings, and none of its versions, contacts or numbers.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası

Şurada da var

API: POST /automations/{id}/duplicate
TypeScript: automations.duplicate()
Python: automations.duplicate()
Ruby: automations.duplicate
PHP: automations->duplicate
Go: Automations.Duplicate
Java: automations().duplicate
C#: Automations.DuplicateAsync

`sendAutomationTest`

automations:writeemails:sendUygulamadaki asistan her zaman önce sorarAraç setiautomations

Send the email of one step of the draft to one address, to read it before publishing. It goes to the user's own account address unless to names another. Contact values come from a sample contact, the subject starts with [Test], and nobody is enrolled. It counts toward the monthly sends.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası
stepKeystringZorunlu: The key of the email step, from the definition getAutomation returns.
1 ile 64 karakter arası
tostring: Where the test goes, when not to the user themselves.
En çok 320 karakterBiçimemail

Şurada da var

API: POST /automations/{id}/test
TypeScript: automations.sendTest()
Python: automations.send_test()
Ruby: automations.send_test
PHP: automations->sendTest
Go: Automations.SendTest
Java: automations().sendTest
C#: Automations.SendTestAsync

`listAutomationVersions`

automations:readUygulamadaki asistan sormadan çalıştırırAraç setiautomations

The published versions of an automation, the newest first: number, when it was published and whether it is the one running. includeDefinitions adds each definition as JSON. restoreAutomationVersion copies one back into the draft.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası
includeDefinitionsboolean: Varsayılanfalse

Şurada da var

API: GET /automations/{id}/versions
TypeScript: automations.listVersions()
Python: automations.list_versions()
Ruby: automations.list_versions
PHP: automations->listVersions
Go: Automations.ListVersions
Java: automations().listVersions
C#: Automations.ListVersionsAsync

`restoreAutomationVersion`

automations:writeSiz istemediyseniz uygulamadaki asistan önce sorarAraç setiautomations

Copy the definition of an earlier version back into the draft, replacing what the draft holds. Nothing that is running changes until publishAutomation.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası
versionintegerZorunlu: The version number, from listAutomationVersions.
En az 1

Şurada da var

API: POST /automations/{id}/versions/{version}/restore
TypeScript: automations.restoreVersion()
Python: automations.restore_version()
Ruby: automations.restore_version
PHP: automations->restoreVersion
Go: Automations.RestoreVersion
Java: automations().restoreVersion
C#: Automations.RestoreVersionAsync

`getAutomationStats`

automations:readUygulamadaki asistan sormadan çalıştırırAraç setiautomations

How one automation did over a window, 30 days by default: contacts that entered, are in it now, completed it or left early, emails sent, delivered, opened, clicked, bounced and marked as spam, and unsubscribes, in total and for each step. Opens are a floor, because many mail apps hide them. includeDaily adds a line for each day.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası
sincestring: Where the window starts, as an ISO 8601 instant.
Biçimdate-time
untilstring: Where the window ends, as an ISO 8601 instant. Left out, now.
Biçimdate-time
includeDailyboolean: Varsayılanfalse

Şurada da var

API: GET /automations/{id}/stats
TypeScript: automations.stats()
Python: automations.stats()
Ruby: automations.stats
PHP: automations->stats
Go: Automations.Stats
Java: automations().stats
C#: Automations.StatsAsync

`listAutomationEnrollments`

automations:readUygulamadaki asistan sormadan çalıştırırAraç setiautomations

The contacts that are in an automation or have been, the most recent entry first: which step each is at, what they are waiting for, what holds a step that is due, when they move next and how it ended. Narrow it by status, by step or by a piece of the address or name. One page at a time: when more follow, the last line gives a cursor.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası
statusstring: Şunlardan biri"active""completed""exited"
stepKeystring: 1 ile 64 karakter arası
qstring: En çok 200 karakter
limitinteger: En az 1En çok 200
cursorstring: 1 ile 64 karakter arası

Şurada da var

API: GET /automations/{id}/enrollments
TypeScript: automations.listEnrollments()automations.listAllEnrollments()automations.iterateEnrollments()
Python: automations.list_enrollments()automations.list_all_enrollments()automations.iterate_enrollments()
Ruby: automations.list_enrollmentsautomations.list_all_enrollmentsautomations.iterate_enrollments
PHP: automations->listEnrollmentsautomations->listAllEnrollmentsautomations->iterateEnrollments
Go: Automations.ListEnrollmentsAutomations.ListAllEnrollmentsAutomations.IterateEnrollments
Java: automations().listEnrollmentsautomations().listAllEnrollmentsautomations().iterateEnrollments
C#: Automations.ListEnrollmentsAsyncAutomations.ListAllEnrollmentsAsyncAutomations.IterateEnrollmentsAsync

`getAutomationEnrollment`

automations:readUygulamadaki asistan sormadan çalıştırırAraç setiautomations

One contact's way through an automation: where they are, and what each step did for them, oldest first, such as an email sent, a wait, a yes or no at a branch, or why a step was skipped or failed.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası
enrollmentIdstringZorunlu: The enrollment, by id (aen_...), from listAutomationEnrollments.
1 ile 64 karakter arası

Şurada da var

API: GET /automations/{id}/enrollments/{enrollmentId}
TypeScript: automations.getEnrollment()
Python: automations.get_enrollment()
Ruby: automations.get_enrollment
PHP: automations->getEnrollment
Go: Automations.GetEnrollment
Java: automations().getEnrollment
C#: Automations.GetEnrollmentAsync

`enrollInAutomation`

automations:writeUygulamadaki asistan her zaman önce sorarAraç setiautomations

Put one contact into a live automation at its first step, whatever starts it normally, so its emails start going to them. The contact has to exist already. A contact is in an automation once at a time, and an address that is suppressed or unsubscribed is refused.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası
emailstringZorunlu: The contact to enroll, by email address.
En çok 320 karakterBiçimemail
dataRecord<string, any>: Values the steps read wherever a value comes from the event, such as an order number. At most 50 keys and 4 KB of JSON.

Şurada da var

API: POST /automations/{id}/enrollments
TypeScript: automations.enroll()
Python: automations.enroll()
Ruby: automations.enroll
PHP: automations->enroll
Go: Automations.Enroll
Java: automations().enroll
C#: Automations.EnrollAsync

`removeFromAutomation`

automations:writeSiz istemediyseniz uygulamadaki asistan önce sorarAraç setiautomations

Take one contact out of an automation at once, by the id of their enrollment from listAutomationEnrollments. They get nothing more from it, and stay in the contacts and in their audiences.

Girdiler

idstringZorunlu: The automation, by id (aut_...). listAutomations finds it by name.
1 ile 64 karakter arası
enrollmentIdstringZorunlu: The enrollment, by id (aen_...), from listAutomationEnrollments.
1 ile 64 karakter arası

Şurada da var

API: POST /automations/{id}/enrollments/{enrollmentId}/exit
TypeScript: automations.exitEnrollment()
Python: automations.exit_enrollment()
Ruby: automations.exit_enrollment
PHP: automations->exitEnrollment
Go: Automations.ExitEnrollment
Java: automations().exitEnrollment
C#: Automations.ExitEnrollmentAsync

`sendContactEvent`

contacts:writeUygulamadaki asistan her zaman önce sorarAraç setiautomations

Record that something happened to one contact, such as order.placed or trial.started. Every live automation that starts on that event name takes the contact in, so its emails start going to them, and a wait step holding out for the name moves on. The answer says which automations it started. Events are kept for 90 days.

Girdiler

namestringZorunlu: What happened, such as order.placed: letters, digits, dots, colons, dashes and underscores. Names are matched exactly, case included.
1 ile 100 karakter arası
emailstringZorunlu: The contact the event is about, by email address.
En çok 320 karakterBiçimemail
propertiesRecord<string, any>: Details of the event as a JSON object, at most 50 keys and 4 KB. An event trigger can filter on them and steps can use them.
occurredAtstring: When it happened, as an ISO 8601 instant. Left out, it is now. Not in the future, and at most 90 days ago.
Biçimdate-time
createContactboolean: true adds the address to the contacts when nobody has it yet.
contactNamestring: The name to give a contact that createContact adds.
En çok 200 karakter

`sendContactEvents`

contacts:writeUygulamadaki asistan her zaman önce sorarAraç setiautomations

Record up to 100 events in one call, each handled as sendContactEvent handles one, in order. One event failing does not stop the rest: the answer says which were recorded, what each started, and why any was not.

Girdiler

eventsobject[]Zorunlu

1 ile 100 arası öğe

namestringZorunlu: What happened, such as order.placed: letters, digits, dots, colons, dashes and underscores. Names are matched exactly, case included.
1 ile 100 karakter arası
emailstringZorunlu: The contact the event is about, by email address.
En çok 320 karakterBiçimemail
propertiesRecord<string, any>: Details of the event as a JSON object, at most 50 keys and 4 KB. An event trigger can filter on them and steps can use them.
occurredAtstring: When it happened, as an ISO 8601 instant. Left out, it is now. Not in the future, and at most 90 days ago.
Biçimdate-time
createContactboolean: true adds the address to the contacts when nobody has it yet.
contactNamestring: The name to give a contact that createContact adds.
En çok 200 karakter

`listContactEventNames`

automations:readUygulamadaki asistan sormadan çalıştırırAraç setiautomations

The names of the events this workspace has recorded in the last 90 days, to choose the event that starts an automation or that a wait step holds out for.

Girdiler

Girdi almaz.

Şurada da var

API: GET /events/names
TypeScript: events.listNames()
Python: events.list_names()
Ruby: events.list_names
PHP: events->listNames
Go: Events.ListNames
Java: events().listNames
C#: Events.ListNamesAsync

`listContactEvents`

contacts:readUygulamadaki asistan sormadan çalıştırırAraç setiautomations

The events recorded for one contact in the last 90 days, the most recent first: name, when it happened and its properties. Narrow it to one event name. One page at a time: when more follow, the last line gives a cursor.

Girdiler

emailstringZorunlu: The contact the event is about, by email address.
3 ile 320 karakter arası
namestring: 1 ile 100 karakter arası
limitinteger: En az 1En çok 200
cursorstring: 1 ile 64 karakter arası

Şurada da var

API: GET /contacts/{email}/events
TypeScript: contacts.listEvents()contacts.listAllEvents()contacts.iterateEvents()
Python: contacts.list_events()contacts.list_all_events()contacts.iterate_events()
Ruby: contacts.list_eventscontacts.list_all_eventscontacts.iterate_events
PHP: contacts->listEventscontacts->listAllEventscontacts->iterateEvents
Go: Contacts.ListEventsContacts.ListAllEventsContacts.IterateEvents
Java: contacts().listEventscontacts().listAllEventscontacts().iterateEvents
C#: Contacts.ListEventsAsyncContacts.ListAllEventsAsyncContacts.IterateEventsAsync

Otomasyonlar

Otomasyon araçları

Referans

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Şurada da var

Girdiler

Girdiler

Girdiler

Şurada da var

Girdiler

Şurada da var

Gelen kutunuz,kendi kurallarınızla.

Gelen kutunuz,
kendi kurallarınızla.